Print This Event
What sections would you like to print?
TurboTrac Systems - TIS
11:30 AM - 1:30 PM
801 - 7th Ave SW
TurboTrac Systems, The Technology for Emissions Reduction and Eco-efficiency (TEREE) PTAC Steering Committee and PTAC Petroleum Technology Alliance Canada invite you or a representative of your organization to attend a Technology Information Session. The objective of the session is to introduce an Infinitely Variable Transmission (IVT) as applied to a pump jack to improve overall production revenue while decreasing operating problems and minimizing costs.
Turbo Trac USA, Inc. is a clean technology company. Turbo Trac is the developer and manufacturer of an innovative Infinitely Variable Mechanical Transmission specifically designed to reduce energy consumption, improve productivity and increase the reliability of pump units. Turbo Trac broadly patented transmission designs can reduce energy consumption by up to 25% in some applications.
With a facility located near Dallas, TX, Turbo Trac has done extensive development work in Canada (Turbo Trac Systems, ULC) as well as in the United States. The company was founded by private investors in the oil and gas industry and received substantial financial support from the state and federal government as well as venture capital in developing its energy-reducing technology.
The company is rolling out its product line with initial installations in the oil and gas industry serving oil-well pumping, water pumping and air compression systems.
The patented, core technology has the ability to provide infinitely variable transmission ratios that result in the ability to decouple the input speed of the prime mover from the output speed provided to the driven device at high torque loads. Acting as a variable speed control device the technology will control the speed of the driven pump jack to meet system requirements. The variable speed component allows the pump jack to start at zero RPM position and slowly ramp up to the desired speed requirement, which allows for a soft start situation. This soft start feature provides the operator with two benefits (1) the possibility of using a smaller prime mover as the startup HP could be reduced and (2) lower peak demand charges from your electric utility.
Scope of Information Session
- Brief introduction
- Presentation of Technology
- Application and benefits of technology
- Question & Answer session
Who Should Attend?
- Operators of gas & oil processing facilities
- Production and facility engineers
- Energy efficiency specialists
- Environment managers
- Those interested in reducing emissions in operations
Scope of Information Session
1. Brief introduction
( 9 Dec)
(Noon on Jan 23)
DISCLAIMER: PTAC does not warrant or make any representations or claims as to the validity, accuracy, currency, timeliness, completeness or otherwise of the information contained in this report , nor shall it be liable or responsible for any claim or damage, direct, indirect, special, consequential or otherwise arising out of the interpretation, use or reliance upon, authorized or unauthorized, of such information.
The material and information in this report are being made available only under the conditions set out herein. PTAC reserves rights to the intellectual property presented in this report, which includes, but is not limited to, our copyrights, trademarks and corporate logos. No material from this report may be copied, reproduced, republished, uploaded, posted, transmitted or distributed in any way, unless otherwise indicated on this report, except for your own personal or internal company use.